Changes from adopted text to adopted text

Removed(iii) provided off-site by:

Removed– high-efficiency heat and power cogeneration;

Removed– waste heat;

Removed– other off-site technologies and sources;

Removed(b) identification of installations that generate waste heat or cold and their potential heating or cooling supply, in GWh per year:

Removed(i) thermal power generation installations that can supply or can be retrofitted to supply waste heat with a total thermal input exceeding 50 MW;

Removed(ii) heat and power cogeneration installations using technologies referred to in Part II of Annex II with a total thermal input exceeding 20 MW;

Removed(iii) waste incineration plants;

Removed(iv) renewable energy installations with a total thermal input exceeding 20 MW other than the installations specified under point 2(b)(i) and (ii) generating heating or cooling using the energy from renewable sources;

Removed(v) industrial installations with a total thermal input exceeding 20 MW which can provide waste heat;

Removed(c) reported share of energy from renewable sources and from waste heat or cold in the final energy consumption of the district heating and cooling sector over the past 5 years, in line with Directive (EU) 2018/2001;

Removed3. a map covering the entire national territory identifying (while preserving commercially sensitive information):

Removed(a) heating and cooling demand areas following from the analysis of point 1, while using consistent criteria for focusing on energy dense areas in municipalities and conurbations;

Removed(b) existing heating and cooling supply points identified under point 2(b) and district heating transmission installations;

Removed(c) planned heating and cooling supply points of the type described under point 2(b) and district heating transmission installations;

Removed4. a forecast of trends in the demand for heating and cooling to maintain a perspective of the next 30 years in GWh and taking into account in particular projections for the next 10 years, the change in demand in buildings and different sectors of the industry, and the impact of policies and strategies related to the demand management, such as long-term building renovation strategies under Directive (EU) 2018/844;

RemovedPart II

RemovedOBJECTIVES, STRATEGIES AND POLICY MEASURES

Removed5. planned contribution of the Member State to its national objectives, targets and contributions for the five dimensions of the Energy Union, as laid out in Article 3(2)(b) of Regulation (EU) 2018/1999, delivered through efficiency in heating and cooling, in particular related to points 1 to 4 of Article 4(b) and to paragraph (4)(b) of Article 15, identifying which of these elements is additional compared to integrated national energy and climate plans;

Removed6. general overview of the existing policies and measures as described in the most recent report submitted in accordance with Articles 3, 20, 21 and 27(a) of Regulation (EU) 2018/1999;

RemovedPart III

RemovedANALYSIS OF THE ECONOMIC POTENTIAL FOR EFFICIENCY IN HEATING AND COOLING

Removed7. an analysis of the economic potential of different technologies for heating and cooling shall be carried out for the entire national territory by using the cost-benefit analysis referred to in Article 23(3) and shall identify alternative scenarios for more efficient and renewable heating and cooling technologies, distinguishing between energy derived from fossil and renewable sources where applicable.

RemovedThe following technologies should be considered:

Removed(a) industrial waste heat and cold;

Removed(b) waste incineration;

Removed(c) high efficiency cogeneration;

Removed(d) renewable energy sources (such as geothermal, solar thermal and biomass) other than those used for high efficiency cogeneration;

Removed(e) heat pumps;

Removed(f) reducing heat and cold losses from existing district networks;

Removed8. this analysis of economic potential shall include the following steps and considerations:

Removed(a) Considerations:

Removed(i) the cost-benefit analysis for the purposes of Article 23(3) shall include an economic analysis that takes into consideration socioeconomic and environmental factors, and a financial analysis performed to assess projects from the investors' point of view. Both economic and financial analyses shall use the net present value as criterion for the assessment;

Removed(ii) the baseline scenario should serve as a reference point and take into account existing policies at the time of compiling this comprehensive assessment, and be linked to data collected under Part I and point 6 of Part II of this Annex;

Removed(iii) alternative scenarios to the baseline shall take into account energy efficiency and renewable energy objectives of Regulation (EU) 2018/1999. Each scenario shall present the following elements compared to the baseline scenario:

Removed– economic potential of technologies examined using the net present value as criterion;

Removed– greenhouse gas emission reductions;

Removed– primary energy savings in GWh per year;

Removed– impact on the share of renewables in the national energy mix.

RemovedScenarios that are not feasible due to technical reasons, financial reasons or national regulation may be excluded at an early stage of the cost-benefit analysis, if justified based on careful, explicit and well-documented considerations.

RemovedThe assessment and decision-making should take into account costs and energy savings from the increased flexibility in energy supply and from a more optimal operation of the electricity networks, including avoided costs and savings from reduced infrastructure investment, in the analysed scenarios.

Removed(b) Costs and benefits

RemovedThe costs and benefits referred to under point 8(a) shall include at least the following benefits and costs:

Removed(i) Benefits:

Removed– value of output to the consumer (heating, cooling and electricity);

Removed– external benefits such as environmental, greenhouse gas emissions and health and safety benefits, to the extent possible;

Removed– labour market effects, energy security and competitiveness, to the extent possible.

Removed(ii) Costs:

Removed– capital costs of plants and equipment;

Removed– capital costs of the associated energy networks;

Removed– variable and fixed operating costs;

Removed– energy costs;

Removed– environmental, health and safety costs, to the extent possible;

Removed– labour market costs, energy security and competitiveness, to the extent possible.

Removed(c) Relevant scenarios to the baseline:

RemovedAll relevant scenarios to the baseline shall be considered, including the role of efficient individual heating and cooling.

Removed(i) the cost-benefit analysis may either cover a project assessment or a group of projects for a broader local, regional or national assessment in order to establish the most cost-effective and beneficial heating or cooling solution against a baseline for a given geographical area for the purpose of planning;

Removed(d) Boundaries and integrated approach:

Removed(i) the geographical boundary shall cover a suitable well-defined geographical area;

Removed(ii) the cost-benefit analyses shall take into account all relevant centralised or decentralised supply resources available within the system and geographical boundary, including technologies considered under point 7 of Part III of this Annex, and heating and cooling demand trends and characteristics.