Text · Amendment list
Amendment 001-023 - Zala Tomašič - Report A10-0173/2025 - Amending the Measuring Instruments Directive
Report A-10-2025-0173-AM-001-023
- Kind
- Amendment list A-10-2025-0173-AM-001-023
- Date
- 6 February 2026
- Dossier
- 2024/0311(COD)
More facts (1)
- Formats
- Official page PDF Word
Text
The text as parsed from the official Word file. Every paragraph has a link (¶) and can be saved to a project as a passage.
Jump to an amendment (23)
| Text proposed by the Commission | Amendment |
|---|---|
| (2) The scope and the associated essential requirements covered by Directive 2014/32/EU were already established by Directive 2004/22/EC3, of which Directive 2014/32/EU is a recast. Thus, they have remained unchanged for more than 20 years. In the meantime, new measuring instruments have appeared on the market that are not covered by Directive 2014/32/EU. That is notably the case for electric vehicle supply equipment and compressed gas dispensers, which are important for the successful rollout of clean mobility. Moreover, Directive 2014/32/EU does not cover thermal energy meters for cooling applications. In addition, as far as electricity and gas meters are concerned, Directive 2014/32/EU neither covers the use of hydrogen and other gases that can be used as alternatives to more traditional gases, nor enables to take full advantage of smart metering which plays an important role in achieving the Union climate objectives. Therefore, it is appropriate to amend the scope of Directive 2014/32/EU and the essential requirements set out in the Annexes to that Directive in order to take into account technological progress. | (2) The scope and the associated essential requirements covered by Directive 2014/32/EU were already established by Directive 2004/22/EC3, of which Directive 2014/32/EU is a recast. Thus, they have remained unchanged for more than 20 years. In the meantime, new measuring instruments have appeared on the market that are not covered by Directive 2014/32/EU. That is notably the case for electric vehicle supply equipment and compressed gas dispensers, which are important for the successful rollout of clean mobility. Moreover, Directive 2014/32/EU does not cover thermal energy meters for cooling applications. In addition, as far as electricity and gas meters are concerned, Directive 2014/32/EU neither covers the use of hydrogen and other gases that can be used as alternatives to more traditional gases, nor enables to take full advantage of smart metering which plays an important role in achieving the Union climate objectives. Therefore, it is appropriate to amend the scope of Directive 2014/32/EU and the essential requirements set out in the Annexes to that Directive in order to take into account technological progress. It is important that further amendments, particularly in response to technological developments such as those affecting water meters, are considered in a future revision of Directive 2014/32/EU. It is important that such a revision aims to assess whether the essential requirements for these measuring instruments remain appropriate to ensure high metrological performance and their compatibility with evolving digital infrastructures. |
| 3 Directive 2004/22/EC of the European Parliament and of the Council of 31 March 2004 on measuring instruments (OJ L 135, 30.4.2004, p. 1, ELI: http://data.europa.eu/eli/dir/2004/22/oj). | 3 Directive 2004/22/EC of the European Parliament and of the Council of 31 March 2004 on measuring instruments (OJ L 135, 30.4.2004, p. 1, ELI: http://data.europa.eu/eli/dir/2004/22/oj). |
| Text proposed by the Commission | Amendment |
|---|---|
| (7a) The improvement of electric vehicle charging infrastructure is in the common interest of all stakeholders. This Directive does not aim to impose retrofitting obligations on existing charging stations, but to establish a harmonised framework for newly installed electric vehicle supply equipment. |
| Text proposed by the Commission | Amendment |
|---|---|
| ʻ10.2. The indication of any result shall be clear and unambiguous, protected against accidental deletion, and accompanied by such marks and inscriptions necessary to inform the user of the significance of the result. Easy reading of the presented result shall be permitted under normal conditions of use. Additional indications may be shown provided they cannot be confused with the metrologically controlled indications.ʼ | ʻ10.2. The indication of any result shall be unequivocally clear and unambiguous, protected against accidental deletion or modification, and accompanied by all marks and inscriptions necessary to inform the user of the significance of the result. Effortless reading of the presented result shall be permitted under normal conditions of use. Additional indications may be shown provided they cannot be confused, under any circumstances, with the metrologically controlled indications.ʼ |
| Text proposed by the Commission | Amendment |
|---|---|
| The presented results shall be traceable to the measuring instrument under metrological control. Security measures shall provide evidence of tampering. | The presented metrologically controlled results, as referred to in point b, shall be traceable to the measuring instrument. Security measures shall provide evidence of tampering. |
| Text proposed by the Commission | Amendment |
|---|---|
| The measurement result presented by the respective technical solution shall serve as the basis for the price to pay, when applicable. | The measurement result presented by the respective technical solution shall only be used as the basis for calculating the price to be paid, when applicable. |
| Text proposed by the Commission | Amendment |
|---|---|
| The data may be made available, in addition, by means of metrologically controlled remote channel. | The metrologically controlled data may be made available, in addition, by means of a remote channel. |
| Text proposed by the Commission | Amendment |
|---|---|
| 10.7. By way of derogation from point 10.4., for measuring systems for EVSE and measuring systems for compressed gas dispensers, the measurement data shall be fully established in a device or a system so that it can be immediately presented to the consumer. | 10.7. By way of derogation from point 10.4., for measuring systems for EVSE used for direct sales and measuring systems for compressed gas dispensers, the measurement data shall be fully established in a device or a system, including cloud-based systems, so that it can be immediately presented to the consumer. |
| Text proposed by the Commission | Amendment |
|---|---|
| 10.8. By way of derogation from point 10.4., measuring systems for EVSE shall be designed to present the measurement result to all parties in the transaction when installed as intended. | 10.8. By way of derogation from point 10.4., measuring systems for EVSE used for direct sales shall present the measurement result to all parties in the transaction when installed as intended. |
| Text proposed by the Commission | Amendment |
|---|---|
| ʻAn instrument designed to measure, memorise and display the quantity of fuel gas (volume or mass) and/or energy of that gas that has passed it.ʼ | ʻAn instrument designed to measure, memorise and display the quantity of fuel gas (volume or mass).ʼ |
| Text proposed by the Commission | Amendment |
|---|---|
| ʻAn active electrical energy meter is an instrument which measures the active electrical energy consumed in a circuit or transferred between circuits.ʼ | ʻAn active electrical energy meter is an instrument measuring the active electrical energy consumed and delivered in an electrical circuit.ʼ |
| Text proposed by the Commission | Amendment | ||
| (2a) in part ‘DEFINITIONS’, at the end of the table, the following row is added: | |||
| top | = | the operating temperature is a specified operating temperature range, within which the variations of operating percentage errors of a meter are specified and determined. |
| Text proposed by the Commission | Amendment |
|---|---|
| The relevant requirements of Annex I, the specific requirements of this Annex and the conformity assessment procedures listed in this Annex apply to measuring systems for EVSE intended for residential, commercial and light industrial use. | The relevant requirements of Annex I, the specific requirements of this Annex and the conformity assessment procedures listed in this Annex apply to measuring systems for EVSE intended for residential, commercial and light industrial use, unless specified otherwise. |
| Text proposed by the Commission | Amendment |
|---|---|
| Measuring systems for EVSE can also have their basic metrology provided by a separately type approved meter which has been tested for compliance with a recognised metering standard with equal or more stringent requirements. | Measuring systems for EVSE may use separately type approved meters to obtain metrology data, provided that the meters comply with the applicable metering standards under this Directive, meeting or exceeding the accuracy and reliability requirements of the measuring system. |
| Text proposed by the Commission | Amendment |
|---|---|
| The manufacturer shall specify the class index of the measuring system for EVSE. The class indices are defined as: Class A, B and C. | The manufacturer shall specify the class index of the measuring system for EVSE. The class indices are defined as: Class X, Y and Z. |
| Text proposed by the Commission | Amendment |
|---|---|
| – the MMQ range shall be: MMQ ≤ 0,1 kWh. | – the MMQ range shall be: MMQ ≤ 2 kWh. |
| Text proposed by the Commission | Amendment |
|---|---|
| – the MMQ range shall be: MMQ ≤ 1 kWh. | – the MMQ range shall be: MMQ ≤ 5 kWh. |
| Text proposed by the Commission | |||
| Amendment | |||
| For current ripple, the limits shall fulfil the conditions set out in Table 1a: | |||
| Table 1a | |||
| Frequency | Present current at transfer point | ||
| I ≤ 200 A DC | 200 A DC < I ≤ 400 A DC | I > 400 A DC | |
| 10 Hz | 1,5 | I x 0,75% | I x 0,75% |
| 5 kHz | 6,0 | 6,0 | I x 1,5% |
| 150 kHz | 9,0 | I x 4,5% | I x 4,5% |
| For voltage ripple, the following limits shall apply: | |||
| For a target voltage of the EV ≤ 500 V DC, ±5 V in normal operation for voltage; | |||
| For a target voltage of the EV > 500 V DC, ±1% V of the target voltage of the EV. |
| Text proposed by the Commission | Amendment |
|---|---|
| A measuring system for EVSE that applies corrections to compensate for energy loss introduced by parts comprising a cable and connector mounted between the position at which the energy is measured and the transfer point shall do either of the following: | A measuring system for EVSE that applies corrections to compensate for energy loss introduced by parts of the EVSE shall do either of the following: |
| Text proposed by the Commission | Amendment |
|---|---|
| Calibration compensation requirements shall apply exclusively to public EVCS installations where billing is based on the energy delivered to the vehicle’s battery. |
| Text proposed by the Commission | Amendment |
|---|---|
| Protection requirements shall apply to any component that may influence calibration and is subject to field replacement. |
| Text proposed by the Commission | Amendment |
|---|---|
| When ancillary devices that are a part of EVSE are used during a charging session, they shall comply with the requirements set out in Table 4 of this point. |
| Text proposed by the Commission | Amendment |
|---|---|
| The electrical energy measured shall be displayed in kilowatt-hours or in megawatt-hours. | The electrical energy measured shall be displayed at least in kilowatt-hours or in megawatt-hours. |
Connections
The dossier, the decisions on this text and its other versions.
No connections found for this item.
Sources & citation
Where the facts on this page come from, and how to cite it.
- Data source
- Licensed CC BY 4.0.
- Retrieved
- 25 September 2026
Cite as
European Parliament (2026). “Amendment 001-023 - Zala Tomašič - Report A10-0173/2025 - Amending the Measuring Instruments Directive”. Text, 6 February 2026. docId A-10-2025-0173-AM-001-023, reference A10-0173/2025. EU Parl Watch Research. https://news.eu-parl.st-solutions.dev/texts/A-10-2025-0173-AM-001-023 (retrieved 25 September 2026). Data: EP Open Data API: document record, https://data.europarl.europa.eu/api/v2/documents/A-10-2025-0173-AM-001-023 (CC BY 4.0).
BibTeX
@misc{epw-text-a-10-2025-0173-am-001-023,
author = {{European Parliament}},
title = {{Amendment 001-023 - Zala Tomašič - Report A10-0173/2025 - Amending the Measuring Instruments Directive}},
year = {2026},
date = {2026-02-06},
howpublished = {\url{https://news.eu-parl.st-solutions.dev/texts/A-10-2025-0173-AM-001-023}},
url = {https://news.eu-parl.st-solutions.dev/texts/A-10-2025-0173-AM-001-023},
urldate = {2026-09-25},
publisher = {EU Parl Watch Research},
note = {Text. docId A-10-2025-0173-AM-001-023, reference A10-0173/2025. Data: EP Open Data API: document record (CC BY 4.0)}
}